We have detected that you are visiting our website from (). To select an alternative currency use the drop down list at the top right hand corner of the page. All currency conversions are approximate.
|
Wuchuan IAD100T 1-port FXS Gateway
 |
- FXS Gateway to connect an analogue telephone to a VoIP Network
- Built-in 10/100 Mbps Ethernet Switch/Router
- Support for 1 x IAX2 and 2 x SIP Accounts
- NAT/PAT transparency for plug & play deployment
- 1 year warranty against hardware defects
- 14 day money back guarantee
- 30 day email support for technical installation issues
|
| Please select plug adapter type required: |
|
|
£39.99
£45.99 inc VAT |
|
|
The stylish IAD100T from Wuchuan Network provides a single, fully featured FXS interface for Asterisk® based IP PBX servers including Trixbox®, AsteriskNOW®, Elastix®, and PBX in a Flash. The IAD100T is ideal for connecting a DECT telephone set to your IP PBX server to provide wireless telephony. Equipped with dual RJ-45 Ethernet ports (one network uplink, one switched/routed port) and dual RJ-11 ports (One FXS, One Life Line). The IAD100T supports one IAX2 (Inter-Asterisk eXchange 2) account, two SIP accounts (Public Server / Private Server) and one PSTN line so can support 4 different telephone numbers simultaneously. Complete NAT transparency is supported to enable full operation behind NAT and PAT firewalls for Plug and Play deployment. It can be configured using a web interface and can be used as an FXS port connected locally to your IP PBX in the office/home or remotely over the Internet to support teleworking.
The IAD100T is one of the most flexible and easy to deploy single port FXS Gateways/ATAs available. The table below provides a comparison between the IAD100T and the Digium® IAXy (S101i).
| |
IAD100T |
IAXy (S101i) |
VoIP Signalling Protocols Supported |
IAX2, SIP |
IAX2 |
Voice Codecs Supported |
G711A/u, G729, G726, iLBC |
G.711u, ADPCM |
Life Line Passthru to PSTN |
 |
 |
Works Behind NAT and PAT firewall |
|
|
Integrated 10/100 Mbps Ethernet Switch/Router |
|
|
Support for L2TP VPN Tunneling |
|
|
Integrated Firewall, NAT, DNS Relay |
|
|
Web/Telnet Based Configuration |
|
|
- Dual RJ-45 Ethernet ports: 1 network uplink and 1 switched/routed port
- No extra cabling/switch required: Connect IAD100T to your computer's original network cable and connect the computer to IAD100T with the supplied network cable
- Support for Fixed IP, DHCP, PPPoE, Automated NAT traversal using IETF STUN (manual configuration of firewall/NAT not required)
- Easy configuration through manual operation (phone keypad, telnet or Web interface) or personalized automated provisioning via central configuration file for mass deployment.
- NAT transparency: Enables full operation behind NAT and PAT firewalls for Plug and Play deployment
- Support for separate voice and data IEEE 802.1Q VLANs with different DiffServ and IEEE 802.1p priority settings for each
- Integrated firewall, NAT and support for L2TP VPN tunneling for additional security
- Integrated DHCP server for LAN port and DNS relay
- Firmware updates supported via HTTP, FTP, TFTP
- Support for multiple administrator accounts based on username / password
- Full IAX2 (Inter-Asterisk eXchange 2) and SIP (RFC3261, RFC2543) protocol support
- Interoperable with various 3rd party SIP end user device, Proxy/Registrar/Server, and gateway products (e.g. Asterisk®/Trixbox® IP PBX, SIP gateway, etc)
- Dual RJ-11 ports: 1 FXS and 1 Life Line
- FXS port: Can be used to connect locally to office/home IP PBX or remotely over the Internet to support teleworking
- Life Line port: Provides built in telephony service backup in case of power or IP PBX system failure
- Support for polarity reversal and DTMF/FSK Caller ID
- Support for call waiting, call transfer, 3 way calling, call forwarding, do not disturb (DND), auto answer, off hook auto dial, quick dial, blacklist number configuration
- Support for T.38 fax relay and fax bypass with G711A/u send/receive
- Wide range of VoIP codecs supported including G711A/u, G729, G726, iLBC
- Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)
- In-band and out-of-band DTMF (in audio, RFC2833, SIP INFO)
- WAN = Uplink Port, LAN = Switched/Routed Port
- PHONE = FXS Port, LINE = Life Line Port
- Dynamic voice test and CNG (Comfort noise generation)
- G.168/165 compliant 16ms echo cancellation
- ITU-T Based Tone generation and local DTMF re-generation
- Voltage: DC 12V / 1A
- Dimensions: 118mm (L) x 86mm (W) x 29mm (H)
- Unit Weight: 272g, Package Weight: 385g
- Certificates: CE, FCC, RoHS Compliant
|
 |
- IAD100T single port FXS Gateway
- UK (Default) or EU 2-pin Power Switching Unit (PSU)
- Quick Start User Guide
- RJ45 Network Patch Cable
Digium® (www.digium.com) and Asterisk® (www.asterisk.org) are registered trademarks of Digium, Inc. Trixbox® (www.trixbox.org) is a registered trademark of Fonality, Inc, Elastix® (www.elastix.org) is a registered of PaloSanto Solutions. Novavox Limited is not affiliated with, nor endorsed by any of the companies listed above. |
