OpenVox A800P 8-port PCI card

			item(s) in your basket:			View Basket

HOME
PRODUCTS: ANALOGUE CARDS / GATEWAYS; Wuchuan IAD100T IAX2 / SIP
1-port FXS Gateway; OpenVox A400P
4-port PCI; OpenVox A400E
4-port PCI Express; OpenVox A800P
8-port PCI; OpenVox FXO-100 / FXS-100 modules; DIGITAL CARDS; VOIP TELEPHONE HANDSETS; VOIP TELEPHONE / CARD BUNDLES; OCTWARE SOFTECHO ECHO CANCELLATION SOFTWARE; IP PBX SERVERS; ACCESSORIES

Currency Information

We have detected that you are visiting our website from (). To select an alternative currency use the drop down list at the top right hand corner of the page. All currency conversions provided are approximate.

Tax Information

Secure Payment

OpenVox A800P 8-port PCI

OpenVox A800P for Digium Asterisk / Trixbox

OpenVox A800P 8-port analogue PCI card
Card shown is A800P44 with 4 FXO (red) and 4 FXS (green) modules but any FXO / FXS module combination is supported
Includes 2 RJ45 to RJ11 splitters to provide 8 RJ11 ports
5 year warranty against hardware defects
14 day money back guarantee
30 day email support for technical installation issues

FXO / FXS Module Combinations

The OpenVox A800P has eight FXS-100 / FXO-100 module slots that can be populated with any combination of modules to accommodate customer specific requirements. Foreign Exchange Subscriber/Station (FXS) modules are used to connect Plain Old Telephony (POTS) analogue telephones, and Foreign Exchange Office (FXO) modules are used to connect to Public Switched Telephone Network (PSTN) lines.

Card	FXS	FXO
A800P10	1	0	£88.99 £102.34 inc VAT
A800P01	0	1	£88.99 £102.34 inc VAT
A800P11	1	1	£109.99 £126.49 inc VAT
A800P40	4	0	£160.99 £185.15 inc VAT
A800P04	0	4	£160.99 £185.15 inc VAT
A800P44	4	4	£256.99 £295.54 inc VAT
A800P80	8	0	£256.99 £295.54 inc VAT
A800P08	0	8	£256.99 £295.54 inc VAT

FXO and FXS modules are also available to order separately via the FXO / FXS Modules page.

Product Overview

Using standard Personal Computer (PC) hardware along with OpenVox A800P PCI cards allows home users and business customers alike to build inexpensive Internet Protocol Private Branch Exchange (IP PBX) platforms. The A800P is a full-length, 8-port Peripheral Component Interconnect (PCI) card and is fully compatible with Digium® TDM800P card and modules. The A800P is compatible with leading open source IP PBX software such as Asterisk®, Trixbox®, and Elastix® (OpenVox are an Elastix® Strategic partner), which support all the sophisticated features of expensive high-end PBX/Voicemail platforms. OpenVox are a Fonality® Authorized / Certified Ecosystem (FACE) partner and the OpenVox A800P is officially certified for use with Trixbox®.

Feature Summary

Firmware accelerates I/O processes to achieve high stability and significantly decreased CPU payload, an A800P with 8 modules installed uses less CPU cycles than a Digium® TDM400P with 4 modules installed

High quality components: OpenVox use the same Tiger Jet 320G PCI controller on the PCI card and the same Silicon Labs chips on the FXS / FXO modules used by Digium®

Support for 1 to 8 RJ-11 ports: Modular design with support for any combination of FXO and FXS interfaces as required

Scalable: IP PBX systems can be upgraded with additional OpenVox PCI cards and FXO/FXS modules as required to support incremental growth

Full length PCI card compatible with all commercially available PC motherboards

Full hardware and software compatibility: Compatible with most well known brands of open source computer telephony equipment

FXO/FXS modules pin-to-pin compatible with Digium® TDM400P/TDM410P/TDM800P/AEX800: OpenVox FXO/FXS modules can be used in Digium® cards and vice versa

Global telephony system support: Configurable line interface to meet international telephone line interface requirements

Technical Summary

Fully PCI 2.2 compliant: Auto-sense compatibility for both 5v and 3.3v PCI busses

32bit / 33 Mhz PCI bus mastering: Direct Memory Access (DMA) for FXO/FXS serial module data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention

Industrial Grade Surface Mounted Electronic Components: Minimal Signal Interference, Reduced Heat Transference and Increased Reliability

Solid tantalum capacitors: High volumetric efficiency/reliability, low Equivalent Series Resistance (ESR) and temperature stability over the range -55°C to +85°C

Integrated air vent holes: Increases convective air flow to improve cooling and increase the lifetime of the card components

Programmable digital hybrid for near-end echo reduction

Support for Digital Gain Control (Transmit and Receive)

Dimensions excluding PCI bracket (H x L x W): 107mm x 246mm x 13mm / 9.75 ” x 4.25 ” x 0.5"

Peak power: 10W with 8 FXO modules / 20W with 8 FXS modules

ROHS compliant: No lead in the Printed Circuit Board (PCB) or parts

Certificates: CE, FCC

IP BPX System Requirements

Installation requires an IP PBX system with the following:

Spare PCI 2.2 slot: 5v and 3.3v PCI buses supported
Spare 12v power connector from the PC power supply: Same connector used to power hard/optical disks (only required for operation of FXS module)

The minimum requirements to support the card are: 800MHz processor, 128MB RAM, Linux kernel 2.4.X or 2.6.X (2.6.X recommended). However, IP PBX system requirements are dependant on the open source telephony software being used and on the number of simultaneous calls to be supported. Two examples are provided in the table below:


	Asterisk® (home use)	Trixbox® (8 calls)
Processor	Intel PIII 500MHz	Intel Celeron D 2.4 Ghz
RAM	128 MB	256 MB
Hard Disk Space	2 GB	80 GB EIDE

Digium® (www.digium.com) and Asterisk® (www.asterisk.org) are registered trademarks of Digium, Inc. Trixbox® (www.trixbox.org) is a registered trademark of Fonality, Inc. Novavox Limited is not affiliated with, nor endorsed by either of the companies listed above.