Analog Cards OpenVox A1200P 12-port PCI

OpenVox A1200P 12-port analogue PCI card
Card shown is A1200P44 with 6 FXO (red) and 6 FXS (green) modules but any FXO / FXS module combination is supported
Includes 3 RJ45 to RJ11 splitters to provide 12 RJ11 ports
5 year warranty against hardware defects
14 day money back guarantee
30 day email support for technical installation issues

Product Overview

Using standard Personal Computer (PC) hardware along with OpenVox A1200P PCI cards allows home users and business customers alike to build inexpensive Internet Protocol Private Branch Exchange (IP PBX) platforms. The A1200P is a full-length, 12-port Peripheral Component Interconnect (PCI) card and is fully compatible with Digium® TDM400P/TDM800P card and modules. The A1200P is compatible with leading open source IP PBX software such as Asterisk®, Trixbox®, and Elastix® (OpenVox are an Elastix® Strategic partner), which support all the sophisticated features of expensive high-end PBX/Voicemail platforms. OpenVox are a Fonality® Authorized / Certified Ecosystem (FACE) partner and the OpenVox A1200P is officially certified for use with Trixbox®.

Feature Summary

Firmware accelerates I/O processes to achieve high stability and significantly decreased CPU payload, an A1200P with 12 modules installed uses less CPU cycles than a Digium® TDM400P with 4 modules installed

High quality components: OpenVox use the same Tiger Jet 320G PCI controller on the PCI card and the same Silicon Labs chips on the FXS / FXO modules used by Digium®

Support for 1 to 12 RJ-11 ports: Modular design with support for any combination of FXO and FXS interfaces as required

Scalable: IP PBX systems can be upgraded with additional OpenVox PCI cards and FXO/FXS modules as required to support incremental growth

Full length PCI card compatible with all commercially available PC motherboards

Full hardware and software compatibility: Compatible with most well known brands of open source computer telephony equipment

FXO/FXS modules pin-to-pin compatible with Digium® TDM400P/TDM410P/TDM800P/AEX800: OpenVox FXO/FXS modules can be used in Digium® cards and vice versa

Global telephony system support: Configurable line interface to meet international telephone line interface requirements

Technical Summary

Fully PCI 2.2 compliant: Auto-sense compatibility for both 5v and 3.3v PCI busses

32bit / 33 Mhz PCI bus mastering: Direct Memory Access (DMA) for FXO/FXS serial module data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention

Industrial Grade Surface Mounted Electronic Components: Minimal Signal Interference, Reduced Heat Transference and Increased Reliability

Solid tantalum capacitors: High volumetric efficiency/reliability, low Equivalent Series Resistance (ESR) and temperature stability over the range -55°C to +85°C

Integrated air vent holes: Increases convective air flow to improve cooling and increase the lifetime of the card components

Programmable digital hybrid for near-end echo reduction

Support for Digital Gain Control (Transmit and Receive)

Dimensions excluding PCI bracket (H x L x W): 107mm x 312mm x 13mm / 4.25 ” x 12.25 ” x 0.5"

Power: 7W Minimum, 37W Maximum at 3.3 V or 5 V

ROHS compliant: No lead in the Printed Circuit Board (PCB) or parts

Certificates: CE, FCC

£62.99

Shopping Cart: 0 items

Shopping Cart:
0 items