Analog Cards OpenVox A800P 8-port PCI

OpenVox A800P 8-port analogue PCI card
Card shown is A800P44 with 4 FXO (red) and 4 FXS (green) modules but any FXO / FXS module combination is supported
5 year warranty against hardware defects
14 day money back guarantee
30 day email support for technical installation issues

Product Overview

Using standard Personal Computer (PC) hardware along with OpenVox A800P PCI cards allows home users and business customers alike to build inexpensive Internet Protocol Private Branch Exchange (IP PBX) platforms. The A800P is a full-length, 8-port Peripheral Component Interconnect (PCI) card and is fully compatible with Digium® TDM800P card and modules. The A800P is compatible with leading open source IP PBX software such as Asterisk®, Trixbox®, and Elastix® (OpenVox are an Elastix® Strategic partner), which support all the sophisticated features of expensive high-end PBX/Voicemail platforms. OpenVox are a Fonality® Authorized / Certified Ecosystem (FACE) partner and the OpenVox A800P is officially certified for use with Trixbox®.

Feature Summary

Firmware accelerates I/O processes to achieve high stability and significantly decreased CPU payload, an A800P with 8 modules installed uses less CPU cycles than a Digium® TDM400P with 4 modules installed

High quality components: OpenVox use the same Tiger Jet 320G PCI controller on the PCI card and the same Silicon Labs chips on the FXS / FXO modules used by Digium®

Support for 1 to 8 RJ-11 ports: Modular design with support for any combination of FXO and FXS interfaces as required

Scalable: IP PBX systems can be upgraded with additional OpenVox PCI cards and FXO/FXS modules as required to support incremental growth

Full length PCI card compatible with all commercially available PC motherboards

Full hardware and software compatibility: Compatible with most well known brands of open source computer telephony equipment

FXO/FXS modules pin-to-pin compatible with Digium® TDM400P/TDM410P/TDM800P/AEX800: OpenVox FXO/FXS modules can be used in Digium® cards and vice versa

Global telephony system support: Configurable line interface to meet international telephone line interface requirements

Technical Summary

Fully PCI 2.2 compliant: Auto-sense compatibility for both 5v and 3.3v PCI busses

32bit / 33 Mhz PCI bus mastering: Direct Memory Access (DMA) for FXO/FXS serial module data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention

Industrial Grade Surface Mounted Electronic Components: Minimal Signal Interference, Reduced Heat Transference and Increased Reliability

Solid tantalum capacitors: High volumetric efficiency/reliability, low Equivalent Series Resistance (ESR) and temperature stability over the range -55°C to +85°C

Integrated air vent holes: Increases convective air flow to improve cooling and increase the lifetime of the card components

Programmable digital hybrid for near-end echo reduction

Support for Digital Gain Control (Transmit and Receive)

Dimensions excluding PCI bracket (H x L x W): 107mm x 246mm x 13mm / 9.75 ” x 4.25 ” x 0.5"

Peak power: 10W with 8 FXO modules / 20W with 8 FXS modules

ROHS compliant: No lead in the Printed Circuit Board (PCB) or parts

Certificates: CE, FCC

Shopping Cart: 0 items

Shopping Cart:
0 items